ГоловнаМапа сайтуЕлектронна пошта
English
Інтерактивний каталог
KBC Bearings Available from Stock
KBC Bearings Available from Stock
Rabe Golden Eagle Disk Harrow Bearing Units
Rabe Golden Eagle Disk Harrow Bearing Units
Horsch Joker, Pronto, Terrano, Tiger Cultivator Bearing Units
Horsch Joker, Pronto, Terrano, Tiger Cultivator Bearing Units
Bonfiglioli Concrete Mixer Gear Reducer Bearings
Bonfiglioli Concrete Mixer Gear Reducer Bearings
Gaspardo Planters Bearings
Gaspardo Planters Bearings
NTN New Joint Venture in Korea for Sales and Production of Bearings for Wind Turbine
Timken Signs Agreement to Sell Needle Roller Bearings Business to JTEKT
• 

Підшипники

Обладнання
Автомобільні частини
Огляд
• 

Основні типи

Інтерактивний каталог
Інформація

Angular Contact Ball Bearings

Розмістити на FacebookОпублікувати у TwitterРозмістити на LinkedInЕлектронна пошта
Due to the features of their raceways, angular contact ball bearings are specially designed for the accommodation of combined loads, i.e. simultaneously acting radial and axial loads. Their ability to perceive the axial load depends on the contact angle between the line joining the contact points of the ball with the raceways of inner and outer rings, and the line being perpendicular to the axis of the bearing. With the increase of contact angle the axial load capacity increases due to the reduced radial load capacity. As per the high-speed characteristics angular contact ball bearings are not inferior to radial ball bearings, but in the precision version they considerably exceed them. Contact angle increase leads to the permitted rotation speed decrease.

In the general engineering fields the most common angular contact ball bearings are single row, double row and four-point contact. Single row bearings can be supplied in the basic and in the universal design for complete mounting or in specially selected sets of two, three or four bearings for installation according to the special arrangements with the given values of the clearance or preload. Single and double row angular contact ball bearings are produced open as well as with the metal shields or contact seals. Four-point contact bearings are manufactured with the split inner or outer rings and are primarily designed for the perception of axial loads.

Angular contact ball bearings are usually manufactured with the cages made of glass fibre reinforced polyamide, but pressed steel or machined brass cages are also possible.

 
Для доступу до інтерактивних ресурсів вам необхідно авторизуватися.
Якщо у вас ще немає логіна і пароля, будь ласка зареєструйтеся.
Забули логін?Забули пароль?Зареєструватися
© 2002–2024 NOC international